Epoxy/ Poly Aspartic Floors In 1 Day!

Here's a step-by-step system for how Wicked Awesome Home Services installs epoxy/polyaspartic garage floors and driveways:

Step 1: Surface Preparation

Clear the area of any furniture, vehicles, or debris.
Use an industrial grinder with diamond tooling to mechanically grind the concrete, opening the pores for better adhesion.
Vacuum the surface thoroughly to remove all dust and debris.
Repair any cracks, divots, or imperfections with a concrete patching compound and grind smooth once cured.

Step 2: Primer & Base Coat Application

Apply an epoxy or moisture-mitigating primer to enhance adhesion and prevent bubbling.
Roll out the base coat of epoxy or polyaspartic evenly across the surface using squeegees and rollers.

Step 3: Broadcast Flakes (If Desired)

While the base coat is still wet, broadcast decorative flakes to full coverage or to the desired density for added texture and aesthetics.

Step 4: Scraping & Cleanup

Once the base coat and flakes have cured, scrape and vacuum excess flakes to create a smooth, uniform surface.

Step 5: Clear Topcoat Application

Apply a high-performance polyaspartic topcoat to seal the surface, providing UV protection, chemical resistance, and durability.
Allow proper curing time before allowing foot or vehicle traffic.

This system results in a long-lasting, high-performance epoxy/polyaspartic floor or driveway that enhances both durability and appearance. Let me know if you want any tweaks!